Cisco ccnp gns3 labs usage and directions

The new CCNP certification has undergone recent, substantial revisions from Cisco. To become certified, you must pass two tests. There is a concentration exam as well as an enterprise core exam. The written exam required to qualify for the ccnp gns3 labs is the Cisco CCNP Enterprise Core.

It's interesting to note that the CCNA certification is no longer a requirement for CCNP certification. Unless you have a lot of experience, the Cisco CCNA is advised. All CCNP examinations now include performance-based labs with Cisco.

CCNP Enterprise Subjects that are New!

So, how many and what kind of switches should you buy? Look at it now.

Catalyst 2950 by Cisco

This excellent layer 2 switch is now rather affordable. These might be available for around $30 if you search. You can practice 90% of the CCNP SWITCH subjects using this switch. There are no issues with spanning tree, ether channels, VLANs, or trunks.

Advantages:

Cheap and provides support for all layer 2 "core" protocols.

Disadvantages:

No routing assistance.

3550 Cisco Catalyst

The 3550 is a layer 3 switch that is now extremely reasonably priced. The 2950-type device also supports routing, allowing you to utilize it for inter-VLAN routing and routing protocols like OSPF or EIGRP. You will require a layer 3 switch because inter-VLAN routing is a key topic in CCNP SWITCH.

This switch's lack of support for private VLANs and StackWise is its lone drawback. Despite the fact that these are both minor concerns in CCNP SWITCH, you cannot configure them on this switch.

Advantages:

Cheap and it provides support for all layer 2 "core" protocols.

allows for routing of the protocols.

Disadvantages:

Private VLAN is not supported.

No Stackwise assistance.

a lack of IPv6 support.

Comments

Post a Comment

Popular posts from this blog

How to Install and Use Cisco Switch Images in GNS3 for Network Simulation

Image
 GNS3 is a powerful tool for network simulation that allows you to build complex networks without the need for physical hardware. With GNS3, you can create virtual network labs that emulate real-world networks and test network configurations in a safe and controlled environment. One of the key components of a network lab is the switch, which plays a critical role in connecting different devices and routing traffic. In this article, we will show you how to install and use Cisco switch images in GNS3 for network simulation. We will walk you through the steps required to set up GNS3 and install Cisco switch images, and then show you how to create a network topology and configure the switches. Step 1: Download and Install GNS3 The first step is to download and install GNS3 on your computer. GNS3 is available for Windows , macOS, and Linux, and you can download it from the official GNS3 website (https://gns3.com/). Once you have downloaded the installer, run it and follow the on...
Read more

How to Configure Fortigate in Eve-ng

Image
  The way of how to add a secure picture to Eve-ng and use the web interface to access it is as follow Eve-ng Fortinet Image Download Fortinet-FGT-v5-build1484 is the filename. FGT VM64 KVM-v5-build1484-FORTINET.out.kvm.zip is the current version. visit the business website at https://support.fortinet.com/Download/FirmwareImages.aspx To upload a eve ng fortigate , create a Fortinet folder using the command mkdir /opt/unetlab/addons/qemu/fortinet-FGT-v5-build1484. Upload the Fortinet image that was downloaded to EVE-ng. Upload the image to the Fortinet folder that was already established in the stage before. Use any method to upload or copy the image to the location. For example, to upload the image to the following path /opt/unetlab/addons/qemu/fortinet-FGT-v5-build1484/ From the EVE go to the newly created folder by typing cd /opt/unetlab/addons/qemu/fortinet-FGT-v5-build1484/. Unzip the file using the following command: FGT VM64 KVM-v5-build1484-FORTINET.out.k...
Read more

How to Integrate Check Point with Eve-ng

Image
  Since Eve-ng offers one of the best platforms for unrestricted testing and preparation, adding an eve ng checkpoint is incredibly easy. The image is required in order to add the firewall to Eve-ng. The download link for juniper vsrx download is there with detailed instructions on how to add it to Eve-NG. The ovf image must be uploaded in Eve-ng before being converted to hda.qcow2 and moved to the appropriate location. You can add Checkpoint in Eve-NG in two different ways. Download the Checkpoint firewall ISO image, install it on VMware, and export it to OVF. You must upload the OVF image to Eve-NG once it has been exported before converting it. Direct Download Checkpoint ISO image is there from the Checkpoint How to set up the Checkpoint on VMware It requires only that you download the template from the following URL and upload it to Eve-ng. After uploading, proceed as follows. From the following link, download the Checkpoint file:   From the Checkpoint Fi...
Read more